5310-01-265-6684 NUT,PLAIN,ROUND Index 5310-01-265-6686 WASHER,FLAT

National Stock Number:
5310-01-265-6685

Federal Supply Class:
5310

National Item Identification Number:
012656685

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
37969704627HYSTER-YALE GROUP, INC.
37969730076HYSTER-YALE GROUP, INC.


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
COLORBLACK OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.557 INCHES MINIMUM AND 0.577 INCHES MAXIMUM
OVERALL DIAMETER1.368 INCHES MINIMUM AND 1.405 INCHES MAXIMUM
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONHCE-551,CAGEC 30076 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
THICKNESS0.086 INCHES MINIMUM AND 0.132 INCHES MAXIMUM


Click here to Register for Free 30-day Trial