|
|
|
National Stock Number:
5310-01-264-6157
Federal Supply Class:
5310
National Item Identification Number:
012646157
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 3578617 | 82577 | RAYTHEON COMPANY |
|
Techincal Specification:
| CROSS-SECTIONAL SHAPE | HEXAGONAL FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | FLANGE THICKNESS | 0.105 INCHES MINIMUM AND 0.110 INCHES MAXIMUM | | FLANGE WIDTH ACROSS FLATS | 0.497 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582,TYPE 303 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A582,TYPE 303SE ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OR STEEL COMP 303SE OVERALL | | NOMINAL THREAD SIZE | 0.375 INCHES | | NUT DIAMETER | 0.450 INCHES MINIMUM AND 0.455 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM | | SPECIAL FEATURES | FLANGE END HOLE THD 0.250-36UNS-2B; GROOVE,0.380 IN. MIN,0.385 IN. MAX ID,0.050 IN. W,INSIDE NUT CORNER W/FLANGE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 4 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 32 | | THREAD PITCH DIAMETERS | +0.3547 TO 0.3586 INCHES | | THREAD SERIES | UNEF |
|
|