|
|
|
National Stock Number:
5310-01-264-1643
Federal Supply Class:
5310
National Item Identification Number:
012641643
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 085 117 30 | 81495 | KOEHRING CRANES INC DBA TEREX CRANES DIV WAVERLY OPERATIONS | | 08511730 | U8326 | BOMAG GB LTD | | CV144703 | KCQ24 | TVS SUPPLY CHAIN SOLUTIONS LTD | | DIN125A-17-A4C | 15526 | METRIC AND MULTISTANDARD COMPONENTS CORP | | DIN125A-M16-A4C | 15526 | METRIC AND MULTISTANDARD COMPONENTS CORP | | IN125-A16-A4C | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 200.0 BRINELL NOMINAL | | HOLE DIAMETER | 17.0 MILLIMETERS NOMINAL | | OVERALL DIAMETER | 30.0 MILLIMETERS NOMINAL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | ZINC AND CHROMATE OVERALL | | THICKNESS | 2.7 MILLIMETERS MINIMUM AND 3.3 MILLIMETERS MAXIMUM |
|
|