|
|
|
National Stock Number:
5310-01-260-3264
Federal Supply Class:
5310
National Item Identification Number:
012603264
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 999-4560-510A | 19710 | MPC PRODUCTS CORPORATION | | 999-4560-510A | 73734 | FEDERAL SCREW PRODUCTS INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.114 INCHES MINIMUM AND 0.119 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,COND T3 OR T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 2024 OVERALL | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 0.173 INCHES MINIMUM AND 0.183 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THICKNESS | 0.016 INCHES NOMINAL |
|
|