|
|
National Stock Number: 5310-01-219-8892
Federal Supply Class: 5310
National Item Identification Number: 012198892
Description: NUT,SLEEVE
Detail: AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
100735 | 54786 | BAE SYSTEMS LAND & ARMAMENTS L.P. | 100735-1 | 54786 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
|
Techincal Specification:
BEARING SURFACE FINISH | 64.0 MICROINCHES | CROSS-SECTIONAL SHAPE | ROUND FLANGE | CROSS-SECTIONAL SHAPE | ROUND NUT | FLANGE DIAMETER | 0.500 INCHES NOMINAL | FLANGE THICKNESS | 0.080 INCHES NOMINAL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5640 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | MATERIAL | STEEL COMP 303 OVERALL | PROPRIETARY CHARACTERISTICS | PACS | NOMINAL THREAD SIZE | 0.190 INCHES | NUT DIAMETER | 0.309 INCHES MINIMUM AND 0.311 INCHES MAXIMUM | NUT LENGTH | 0.289 INCHES MINIMUM AND 0.291 INCHES MAXIMUM | NUT STYLE | SLEEVE | SPECIAL FEATURES | OUTSIDE DIAMETER OF NUT FINISHED 32.0 MICROINCHES; SLOT IN TOP OF FLANGE | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | SURFACE TREATMENT | OXIDE OVERALL | THREAD CLASS | 3B | THREAD DIRECTION | RIGHT-HAND | THREAD QUANTITY PER INCH | 32 | THREAD SERIES | UNF |
|
|