| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.371 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.750 INCHES MINIMUM AND 0.754 INCHES MAXIMUM |
| FEATURES PROVIDED | FLOATING NUT |
| LOCKING FEATURE | FREE-RUNNING ALL METAL DESIGN |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BASE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE CAP |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATERIAL | STEEL COMP 1050 CAP |
| MATERIAL | STEEL COMP 1050 BASE |
| MATERIAL | STEEL COMP 4130 NUT |
| PLATE THICKNESS | 0.020 INCHES MAXIMUM |
| PLATE WIDTH | 0.622 INCHES MAXIMUM |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| NUT HEIGHT | 0.560 INCHES MAXIMUM |
| NUT LENGTH | 0.967 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| SPECIAL FEATURES | SEAL MATERIAL MEETS APPLICABLE REQUIREMENTS FOR USE WITH AIRCRAFT TYPES 1,2,3 FUELS PER SPEC. MIL-R-6855. APPLICABLE PRESSURE RANGE PORM 50 PSI |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BASE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE CAP |
| SURFACE TREATMENT | CADMIUM BASE |
| SURFACE TREATMENT | CADMIUM CAP |
| SURFACE TREATMENT | CADMIUM NUT |
| TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 225.0 DEG FAHRENHEIT MAXIMUM |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES | UNJF |