|
|
|
National Stock Number:
5310-01-215-5384
Federal Supply Class:
5310
National Item Identification Number:
012155384
Description:
WASHER,SHOULDERED AND RECESSED
Detail:
A washer, round in shape, having a centrally located hole. One bearing surface is flat, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. Either or both of the bearing surfaces must be broken by a counterbore, countersink, or similar shaped recess. The thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. For items having a shoulder (boss) of greater thickness, use BEARING, SLEEVE; BUSHING, SLEEVE; or SPACER, SLEEVE. Excludes INSULATOR, WASHER and thrust type washers.
|
Manufacturer Information:
| G-306772 | 28548 | FABRICATION SPECIALTY INC | | G-306772 | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO | | G306772 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| HOLE DIAMETER | 0.3537 INCHES MINIMUM AND 0.3541 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.032 INCHES NOMINAL | | MATERIAL | STEEL COMP 302 OVERALL | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | RECESS DIAMETER | 0.3641 INCHES MINIMUM AND 0.3737 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM | | SHOULDER HEIGHT | 0.015 INCHES NOMINAL | | STYLE DESIGNATOR | SHOULDERED AND RECESSED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | GA-3023,FSCM 64959 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|