|
|
|
National Stock Number:
5310-01-215-5382
Federal Supply Class:
5310
National Item Identification Number:
012155382
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 5007389 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM | | BOTTOM RECESS DIAMETER | 0.500 INCHES MINIMUM AND 0.530 INCHES MAXIMUM | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM | | HEAT TREATMENT | HARDENED | | HOLE DIAMETER | 0.458 INCHES MINIMUM AND 0.463 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.122 INCHES MINIMUM AND 0.128 INCHES MAXIMUM | | MATERIAL | STEEL COMP 630 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 0.923 INCHES MINIMUM AND 0.953 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | SURFACE FINISH | 32.0 MICROINCHES BOTTOM | | SURFACE FINISH | 32.0 MICROINCHES TOP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PN14.10,FSCM 99167 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | TOP RECESS ANGLE | 85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM | | TOP RECESS DIAMETER | 0.500 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
|
|