5310-01-211-3072, WASHER,FLAT

National Stock Number:
5310-01-211-3072

Federal Supply Class:
5310

National Item Identification Number:
012113072

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

S9011F248-070	59364	HONEYWELL INTERNATIONAL INC.
S9011F248-070	99193	HONEYWELL INTERNATIONAL INC.

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM
OVERALL DIAMETER	1.300 INCHES MINIMUM AND 1.310 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 4TH MATERIAL RESPONSE OR AMS 5510 ASSN STD 4TH MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP 321 OVERALL
PERIPHERAL SHAPE STYLE	ROUND
SPECIFICATION/STANDARD DATA	99193-S9011 MANUFACTURERS STANDARD
THICKNESS	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM

Click here to Register for Free 30-day Trial