| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.234 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.466 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| COUNTERBORE DIAMETER | 0.168 INCHES MINIMUM NUT |
| HARDNESS RATING | 49.0 ROCKWELL C MAXIMUM |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| LUBRICATION | SOLUBLE LUBRICANT |
| NUT COUNTERBORE DEPTH | 0.062 INCHES MINIMUM NUT |
| NUT LENGTH | 0.692 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | COUNTERSUNK HOLES OR DIMPLED HOLES |
| NUT HEIGHT | 0.250 INCHES MAXIMUM |
| NUT STYLE | PLATE |
| MATERIAL | STEEL OVERALL |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE COUNTERSINK ANGLE | 98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| NOMINAL THREAD SIZE | 0.164 INCHES |
| PLATE THICKNESS | 0.047 INCHES MAXIMUM |
| PLATE WIDTH | 0.230 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| SPECIAL FEATURES | DIMPLED HOLE DIA 0.098 IN MIN,0.113 IN MAX |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY2,CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| TEMP RATING | 450.0 FAHRENHEIT MAXIMUM |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES | UNJC |
| THREAD QUANTITY PER INCH | 32 |