|
|
|
National Stock Number:
5310-01-208-5262
Federal Supply Class:
5310
National Item Identification Number:
012085262
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| S8154-82C020 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.525 INCHES MINIMUM AND 0.535 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,COND 1/4 H,1/2 H OR FULL H MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5059,COND 1/4 H,FINISH NO. 2B MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR ASTM A582 ASSN STD 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 301 OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 303 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 1.110 INCHES MINIMUM AND 1.124 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES ALL SURFACES | | THICKNESS | 0.020 INCHES NOMINAL |
|
|