|
|
|
National Stock Number:
5310-01-208-1965
Federal Supply Class:
5310
National Item Identification Number:
012081965
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 77643-70X8 PIECE 5 | 96169 | ELECTRIC BOAT CORPORATION | | SSN637-501-2159954 PIECE 5 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.375 INCHES NOMINAL | | DRIVE POINT DIAMETER | 0.203 INCHES NOMINAL | | DRIVE POINT QUANTITY | 2 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-465 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 630 OVERALL | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | PROPRIETARY CHARACTERISTICS | MRCS | | NOMINAL THREAD SIZE | 0.750 INCHES | | NUT DIAMETER | 1.746 INCHES MINIMUM AND 1.748 INCHES MAXIMUM | | NUT THICKNESS | 1.125 INCHES NOMINAL | | SMALL END DIAMETER | 1.121 INCHES MINIMUM AND 1.123 INCHES MAXIMUM | | SPECIAL FEATURES | ONE TAPPED HOLE ON WRENCHING FACE 0.250-20UNC-2B | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 10 | | THREAD SERIES | UNC | | UNDERCUT THICKNESS | 0.375 INCHES NOMINAL |
|
|