5310-01-206-7302, WASHER,FLAT

National Stock Number:
5310-01-206-7302

Federal Supply Class:
5310

National Item Identification Number:
012067302

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

225374 PIECE 148	43689	HUNTINGTON INGALLS INC
5035655-1	57958	SIGNALS WARFARE PROJECT MANAGER
803-4384538 PIECE 148	80064	NAVAL SHIP SYSTEMS COMMAND
803-4384538 SH 21 PIECE 148	80064	NAVAL SHIP SYSTEMS COMMAND
FF-W-92	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS15795-839	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS15795-839	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	3.115 INCHES MINIMUM AND 3.190 INCHES MAXIMUM
OVERALL DIAMETER	5.490 INCHES MINIMUM AND 5.565 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 316 OVERALL
NONDEFINITIVE SPEC/STD DATA	A TYPE AND 1 GRADE AND B CLASS
PERIPHERAL SHAPE STYLE	ROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THICKNESS	0.249 INCHES MINIMUM AND 0.327 INCHES MAXIMUM

Click here to Register for Free 30-day Trial