|
|
|
National Stock Number:
5310-01-205-3456
Federal Supply Class:
5310
National Item Identification Number:
012053456
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 3601450-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.065 INCHES MINIMUM AND 0.095 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 4 | | DRIVE POINT WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | COUNTERSINK ANGLE | 45.0 DEGREES NOMINAL FIRST END | | COUNTERSINK ANGLE | 45.0 DEGREES NOMINAL SECOND END | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6415 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4340 OVERALL | | NOMINAL THREAD SIZE | 1.375 INCHES | | NUT DIAMETER | 1.670 INCHES MINIMUM AND 1.680 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM | | SPECIAL FEATURES | TWO OUTER EDGES CHAMFERED 40.0 DEG MIN TO 50.0 DEG MAX BY 0.03 IN. MIN TO 0.05 IN. MAX DEEP; TWO DIAMETRICALLY OPPOSITE CURVEDAXIAL GROOVES CENTERED BETWEEN TWO DRIVE SLOTS 0.170 IN. MIN RADIUS TO 0.190 IN MAX RADIUS,BOTTOM OF GROOVE EXTENDS TO A DEPTH 0.770 IN. MIN,0.790 IN. MAX FROM AXIAL CENTER | | SPECIAL TEST FEATURES | MAGNETIC PARTICLE INSPECT PER EMS52308 CL 2,FSCM 99193 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES | UN |
|
|