|
|
|
National Stock Number:
5310-01-204-8870
Federal Supply Class:
5310
National Item Identification Number:
012048870
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 0601B0079-20 | 03538 | LOCKHEED MARTIN CORPORATION | | 0601B0079-20 | 54497 | MARTIN MARIETTA TECHNOLOGIES INC SUB OF MARTIN MARIETTA CORP AERO AND NAVAL SYSTEMS | | 7577429-005 | 03538 | LOCKHEED MARTIN CORPORATION | | 7577429-005 | 13160 | GENERAL DYNAMICS LAND SYSTEMS INC. | | 7577429-005 | 59076 | DESIGNATRONICS INC STOCK DRIVE PRODUCTS DIV | | 7X8-A12020 | 14519 | DESIGNATRONICS INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.628 INCHES MINIMUM AND 0.633 INCHES MAXIMUM | | OVERALL DIAMETER | 0.868 INCHES MINIMUM AND 0.873 INCHES MAXIMUM | | MATERIAL | STEEL COMP 303 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.019 INCHES MINIMUM AND 0.021 INCHES MAXIMUM |
|