3120-01-167-0253 BEARING,WASHER,THRUST Index 5310-01-167-0257 WASHER,RECESSED

National Stock Number:
5310-01-167-0256

Federal Supply Class:
5310

National Item Identification Number:
011670256

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
LD153-0027-201243999THE BOEING COMPANY


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CRITICALITY CODE JUSTIFICATIONFEAT
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
HOLE DIAMETER0.752 INCHES MINIMUM AND 0.756 INCHES MAXIMUM
OVERALL DIAMETER1.230 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP XM-13 OVERALL
PERIPHERAL SHAPE STYLEROUND
SPECIAL FEATURESPER 417 SCMS LANDING GEAR LEAD ENG ITEM IS REQUIRED TO HAVE A CRITICALITY CODE OF Y
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THICKNESS0.054 INCHES MINIMUM AND 0.070 INCHES MAXIMUM


Click here to Register for Free 30-day Trial