|
|
National Stock Number: 5310-01-166-6154
Federal Supply Class: 5310
National Item Identification Number: 011666154
Description: WASHER,FLAT
Detail: A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
13218E5139-5 | 97403 | CECOM LR CENTER |
|
Techincal Specification:
CENTER HOLE SHAPE STYLE | ROUND | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | HOLE DIAMETER | 2.410 INCHES MINIMUM AND 2.470 INCHES MAXIMUM | OVERALL DIAMETER | 3.150 INCHES MINIMUM AND 3.330 INCHES MAXIMUM | MATERIAL | ALUMINUM ALLOY 5052 OR ALUMINUM ALLOY 6061 OVERALL | PERIPHERAL SHAPE STYLE | ROUND | SPECIAL FEATURES | TEMPER H32 (5052 MATL) OR TEMPER T6 (6061 MATL) | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-T-704,TY A,SEMIGLOSS MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | SURFACE TREATMENT | PAINT OVERALL | THICKNESS | 0.032 INCHES NOMINAL |
|
|