|
|
|
National Stock Number:
5310-01-165-9168
Federal Supply Class:
5310
National Item Identification Number:
011659168
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 4G53824-103A | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| HOLE DIAMETER | 0.562 INCHES MINIMUM AND 0.572 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.780 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7220,COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM | | MATERIAL | STEEL COMP 302 OVERALL | | RECESS ANGLE | 45.0 DEGREES NOMINAL | | RECESS DIAMETER | 0.705 INCHES NOMINAL | | STYLE DESIGNATOR | RECESSED |
|
|