|
|
|
National Stock Number:
5310-01-165-2382
Federal Supply Class:
5310
National Item Identification Number:
011652382
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| LD153-0027-1018 | 43999 | THE BOEING COMPANY |
|
Techincal Specification:
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 1.127 INCHES MINIMUM AND 1.131 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.775 INCHES MINIMUM AND 1.795 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.054 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | MATERIAL | STEEL COMP XM-13 OVERALL | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | RECESS DIAMETER | 1.369 INCHES MINIMUM AND 1.379 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|