|
|
|
National Stock Number:
5310-01-162-7915
Federal Supply Class:
5310
National Item Identification Number:
011627915
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 4675792 ITEM 22 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 501-4675792 ITEM 22 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 87643-9804 ITEM 22 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.530 INCHES NOMINAL | | OVERALL DIAMETER | 1.440 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-465 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | COPPER ALLOY 606 OR COPPER ALLOY 614 OR COPPER ALLOY 630 OR COPPER ALLOY 642 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.120 INCHES NOMINAL |
|
|