|
|
|
National Stock Number:
5310-01-162-7912
Federal Supply Class:
5310
National Item Identification Number:
011627912
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 11562303 | 7X677 | GENERAL MOTORS LLC | | 1727059 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 1727059 | 7X677 | GENERAL MOTORS LLC | | 50028706 | K0407 | BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED | | 50028706 | U07Z1 | BAES GCS TERRIER SSC 3 PROJECT | | 8C0566 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM | | OVERALL DIAMETER | 24.8 MILLIMETERS MINIMUM AND 25.4 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1055 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | GM 4342M CODE 20 U32,FSCM 11862 MFR REF SINGLE TREATMENT RESPONSE OR GM 4342M CODE 20M U32,FSCM 11862 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | THICKNESS | 2.35 MILLIMETERS MINIMUM AND 2.70 MILLIMETERS MAXIMUM |
|
|