|
|
|
National Stock Number:
5310-01-162-2528
Federal Supply Class:
5310
National Item Identification Number:
011622528
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 353341 | 21938 | MAHR INC | | 353341 | 26984 | RICHMOND LOX EQUIPMENT CO SUB OF RICHMOND TANK CAR CO | | 353341 | 31856 | CRANE CO | | 353341 | 77445 | RTX CORPORATION | | 353341 | JA269 | TOKYO JUDOI KOGYO K.K. | | 353341 | S0554 | TOKYO JUDOGI KOGYO CO. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.4995 INCHES MINIMUM AND 0.5035 INCHES MAXIMUM | | OVERALL DIAMETER | 1.460 INCHES MINIMUM AND 1.480 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3617 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | PLASTIC POLYAMIDE OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
|
|