|
|
|
National Stock Number:
5310-01-161-6122
Federal Supply Class:
5310
National Item Identification Number:
011616122
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10109875 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 965135-172 | 93835 | PARKER-HANNIFIN CORP |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.690 INCHES MINIMUM AND 0.700 INCHES MAXIMUM | | OVERALL DIAMETER | 0.921 INCHES MINIMUM AND 0.953 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5518,1/2 HARD ASSN STD 1ST MATERIAL RESPONSE OR AMS 5519,HARD ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-5059,1/2 HARD,3/4 HARD,HARD MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059,1/2 HARD,3/4 HARD,HARD MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5059,1/2 HARD,3/4 HARD,HARD MIL SPEC 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | M+22,FSCM 93835 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.0201 INCHES NOMINAL |
|
|