|
|
|
National Stock Number:
5310-01-161-5514
Federal Supply Class:
5310
National Item Identification Number:
011615514
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| K33170-1 | 07639 | GE AVIATION SYSTEMS LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | OVERALL DIAMETER | 0.665 INCHES MINIMUM AND 0.675 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 303 OR STEEL COMP 303SE OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 101163,FSCM 07639 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM |
|
|