|
|
|
National Stock Number:
5310-01-160-5727
Federal Supply Class:
5310
National Item Identification Number:
011605727
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 7800580 | 0A335 | LINEAR MOTION LLC | | 7800580 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 7800580 | 52788 | GENERAL MOTORS CORP SAGINAW DIV | | 7800580 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.755 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 1008 OVERALL OR STEEL COMP 1009 OVERALL OR STEEL COMP 1010 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 1.120 INCHES NOMINAL | | THICKNESS | 0.0478 INCHES NOMINAL |
|
|