|
|
|
National Stock Number:
5310-01-160-3966
Federal Supply Class:
5310
National Item Identification Number:
011603966
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 2825656-1 | 52088 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 2 | | DRIVE POINT WIDTH | 0.041 INCHES MINIMUM AND 0.051 INCHES MAXIMUM | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL BOTH ENDS | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR QQ-S-763,COND A OR B FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-763,COND A OR B FED SPEC 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OR STEEL COMP 302 OR STEEL COMP 304 OVERALL | | NOMINAL THREAD SIZE | 0.164 INCHES | | NUT DIAMETER | 0.307 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.157 INCHES MINIMUM AND 0.167 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES | UNC |
|
|