|
|
|
National Stock Number:
5310-01-159-6593
Federal Supply Class:
5310
National Item Identification Number:
011596593
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 46725 | 81263 | UNIVERSAL COMPONENTS CORP | | MA362-21077 | 34623 | AM GENERAL LLC |
|
Techincal Specification:
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 1.002 INCHES MINIMUM AND 1.008 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 1.515 INCHES MINIMUM AND 1.525 INCHES MAXIMUM | | SURFACE TREATMENT | PHOSPHATE OVERALL | | THICKNESS | 0.044 INCHES MINIMUM AND 0.050 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND |
|
|