|
|
|
National Stock Number:
5310-01-077-8662
Federal Supply Class:
5310
National Item Identification Number:
010778662
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| GN10FM26 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 2 | | DRIVE POINT WIDTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | COUNTERSINK ANGLE | 88.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM BOTH ENDS | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | NOMINAL THREAD SIZE | 1.625 INCHES | | NUT DIAMETER | 2.109 INCHES MINIMUM AND 2.141 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.328 INCHES MINIMUM AND 0.359 INCHES MAXIMUM | | SPECIAL FEATURES | 3 HOLES EACH ON OPPOSITE FACES 120 DEG APART,0.045 IN. MIN 0.050 IN. MAX DIA AND DRILLED ON 45 DEG ANGLE | | SPECIFICATION/STANDARD DATA | 26512-GN10FM MANUFACTURERS STANDARD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3B | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES | UNJEF |
|
|