|
|
|
National Stock Number:
5310-01-074-0254
Federal Supply Class:
5310
National Item Identification Number:
010740254
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 714-188660-002 | 90073 | CMC ELECTRONICS INC |
|
Techincal Specification:
| DRIVE POINT QUANTITY | 8 | | DRIVE POINT WIDTH | 0.235 INCHES MINIMUM AND 0.280 INCHES MAXIMUM | | DRIVE POINT DEPTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE NOMINAL THREAD DIAMETER | 0.190 INCHES | | HOLE THREAD QUANTITY PER INCH | 32 | | HOLE TYPE AND QUANTITY | 4 TAPPED | | MATERIAL | COPPER ALLOY 865 OVERALL | | NOMINAL THREAD SIZE | 2.751 INCHES | | NUT DIAMETER | 3.625 INCHES NOMINAL | | NUT STYLE | ROUND | | NUT THICKNESS | 0.220 INCHES MINIMUM AND 0.235 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,CLASS 1 TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD DIRECTION | LEFT-HAND | | THREAD PITCH DIAMETERS | +2.7149 TO 2.7200 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES | UNS |
|
|