|
|
|
National Stock Number:
5310-01-065-5944
Federal Supply Class:
5310
National Item Identification Number:
010655944
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| GNI0FM20 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 2 | | DRIVE POINT WIDTH | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | COUNTERSINK ANGLE | 88.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM NUT | | NUT DIAMETER | 1.734 INCHES MINIMUM AND 1.766 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.328 INCHES MINIMUM AND 0.359 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 TEMPER T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | NOMINAL THREAD SIZE | 1.250 INCHES | | SPECIAL FEATURES | 3 LOCKWIRE HOLES EQUALLY SPACED DRILLED FROM ONE BEARING SURFACE TO THE PERIPHERY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SPECIFICATION/STANDARD DATA | 26512-GN10FM MANUFACTURERS STANDARD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TYPE 2 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNJEF | | THREAD QUANTITY PER INCH | 18 |
|
|