|
|
|
National Stock Number:
5310-01-065-2596
Federal Supply Class:
5310
National Item Identification Number:
010652596
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10039140 | 61C19 | MIL-COTS CORPORATION | | 120394 | 338X5 | ND DEFENSE LLC | | 12759-00101 | 0Y3H3 | FASTENAL COMPANY | | 25709R1 | 31007 | NAVISTAR INTL CORP | | 25709R1 | 338X5 | ND DEFENSE LLC | | 25709R1 | 89346 | NAVISTAR INTL CORP TRUCK BR OHIO PLANT | | 25709R1 | Z0009 | INTERNATIONAL TRUCKS AUSTRALIALIMITED | | 33115 | 0Y3H3 | FASTENAL COMPANY | | 33193 | 0Y3H3 | FASTENAL COMPANY | | ESP-F-16.101-GS | 338X5 | ND DEFENSE LLC | | ESP-F-16.104-PP | 338X5 | ND DEFENSE LLC |
|
Techincal Specification:
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER, .406 X .812 X .051 | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 0.812 INCHES NOMINAL | | SPECIAL FEATURES | NOMINAL SIZE IS 0.375 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ZINC TRIVALENT (ZN6A) CEMS G-20, CLASS 6A MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | THICKNESS | 0.089 INCHES NOMINAL | | CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.406 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | 1040 TO 1065 PER CEMS A-0, PART 1, QUENCHED AND TEMPERED TO RC 36 TO 42 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ZINC OVERALL |
|
|