|
|
|
National Stock Number:
5310-01-062-6474
Federal Supply Class:
5310
National Item Identification Number:
010626474
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| GN10FM40 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.120 INCHES NOMINAL | | DRIVE POINT QUANTITY | 2 | | DRIVE POINT WIDTH | 0.190 INCHES NOMINAL | | BEARING SURFACE FINISH | 125.0 MICROINCHES | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | NUT DIAMETER | 2.284 INCHES MINIMUM AND 3.016 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.328 INCHES MINIMUM AND 0.359 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | NOMINAL THREAD SIZE | 2.500 INCHES | | SPECIAL FEATURES | DRILLEDFOR LOCKING WIRE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNJ | | THREAD QUANTITY PER INCH | 16 |
|
|