|
|
|
National Stock Number:
5310-01-057-7165
Federal Supply Class:
5310
National Item Identification Number:
010577165
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 61201-003 | 58114 | REXROTH CORP THE MOBILE HYDRAULICS DIV | | 61201-003 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 61201-003 | Z4743 | BOSCH REXROTH PTY LTD | | R978728880 | 58114 | REXROTH CORP THE MOBILE HYDRAULICS DIV |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.390 INCHES NOMINAL | | OVERALL DIAMETER | 0.812 INCHES NOMINAL | | MATERIAL | STEEL COMP 1038 OR STEEL COMP 1045 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.112 INCHES MINIMUM AND 0.127 INCHES MAXIMUM |
|
|