|
|
|
National Stock Number:
5310-01-057-3769
Federal Supply Class:
5310
National Item Identification Number:
010573769
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 4398602-A-107 | 25685 | NAVAL SHIP ENGINEERING CENTER PHILADELPHIA DIVISION SUBMARINE ANTENNA QUALITY ASSURANCE | | 4398602-A-107 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | FF-W-84 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS51848-12MONEL | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SS-585-4398602 ITEM 107 | 25685 | NAVAL SHIP ENGINEERING CENTER PHILADELPHIA DIVISION SUBMARINE ANTENNA QUALITY ASSURANCE |
|
Techincal Specification:
| DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM | | HEAT TREATMENT | COLD DRAWN AND AGE HARDENING | | HOLE DIAMETER | 0.377 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.550 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286,CL A,FM 2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.125 INCHES MINIMUM | | MATERIAL | NICKEL ALLOY OVERALL | | MINIMUM TENSILE STRENGTH | 155000 POUNDS PER SQUARE INCH | | NONDEFINITIVE SPEC/STD DATA | G CLASS | | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND |
|