5330-01-042-2331 GASKET Index 5905-01-042-2335 RESISTOR,FIXED,WIRE WOUND,INDUCT

National Stock Number:
5310-01-042-2332

Federal Supply Class:
5310

National Item Identification Number:
010422332

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
5310PL08263919009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
9107M39P0107482GENERAL ELECTRIC COMPANY
9107M39P011P230SPECIALTY WASHER CO OF SOUTH CAROLINA INC


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.343 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
OVERALL DIAMETER0.866 INCHES MINIMUM AND 0.884 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 321 OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.090 INCHES MINIMUM AND 0.098 INCHES MAXIMUM


Click here to Register for Free 30-day Trial