5310-01-040-4753 WASHER,FLAT Index 5310-01-040-4755 WASHER,FLAT

National Stock Number:
5310-01-040-4754

Federal Supply Class:
5310

National Item Identification Number:
010404754

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
10057879318MEGGITT NORTH HOLLYWOOD INC


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.251 INCHES MINIMUM AND 0.256 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 301 OVERALL
PERIPHERAL SHAPE STYLEROUND
PROPRIETARY CHARACTERISTICSPACS
OVERALL DIAMETER0.406 INCHES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONSPS 107 FSCM 79318 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THICKNESS0.013 INCHES MINIMUM AND 0.017 INCHES MAXIMUM


Click here to Register for Free 30-day Trial