|
|
|
National Stock Number:
5310-01-037-3428
Federal Supply Class:
5310
National Item Identification Number:
010373428
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 2105543 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| COUNTERBORE DIAMETER | 0.452 INCHES MINIMUM AND 0.455 INCHES MAXIMUM NUT | | CROSS-SECTIONAL SHAPE | ROUND NUT | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582,CONDITION A ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD SIZE | 0.500 INCHES | | NUT COUNTERBORE DEPTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM NUT | | NUT DIAMETER | 0.688 INCHES NOMINAL | | NUT LENGTH | 1.125 INCHES NOMINAL | | NUT STYLE | SLEEVE | | SPECIAL FEATURES | INTERNAL GROOVE 0.188 IN. W BY 0.505 IN. DIA 0.328 IN. FROM THREAD END,OPPOSITE END FROM THREAD END HAS A 0.312 IN. DIA HOLE 0.125 IN. DEEP | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.281 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES | UNS |
|
|