|
|
|
National Stock Number:
5310-01-034-2836
Federal Supply Class:
5310
National Item Identification Number:
010342836
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 5000861 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| COUNTERBORE DIAMETER | 0.318 INCHES MINIMUM AND 0.322 INCHES MAXIMUM NUT | | COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL NUT | | CROSS-SECTIONAL SHAPE | HEXAGONAL FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | FLANGE WIDTH ACROSS FLATS | 0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | FLANGE THICKNESS | 0.148 INCHES MINIMUM AND 0.163 INCHES MAXIMUM | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 630 OVERALL | | NOMINAL THREAD SIZE | 0.312 INCHES | | NUT COUNTERBORE DEPTH | 0.162 INCHES MINIMUM AND 0.182 INCHES MAXIMUM NUT | | NUT DIAMETER | 0.413 INCHES MINIMUM AND 0.417 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.192 INCHES MINIMUM AND 0.212 INCHES MAXIMUM | | THREAD CLASS | 3B | | THREAD DIRECTION | LEFT-HAND | | THREAD LENGTH | 0.178 INCHES MINIMUM AND 0.193 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES | UNJF |
|
|