|
|
|
National Stock Number:
5310-01-030-8420
Federal Supply Class:
5310
National Item Identification Number:
010308420
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| ST4M150C4001 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| HOLE DIAMETER | 0.252 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL THICKNESS | 0.074 INCHES MINIMUM AND 0.082 INCHES MAXIMUM | | MATERIAL | STEEL COMP 321 OR STEEL COMP 347 OVERALL | | MINIMUM TENSILE STRENGTH | 75000 POUNDS PER SQUARE INCH | | RECESS DIAMETER | 0.334 INCHES MINIMUM AND 0.344 INCHES MAXIMUM | | RECESS ANGLE | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM | | STYLE DESIGNATOR | RECESSED | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|