|
|
|
National Stock Number:
5310-01-030-4911
Federal Supply Class:
5310
National Item Identification Number:
010304911
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| S8153-21-050C | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.515 INCHES MINIMUM AND 0.525 INCHES MAXIMUM | | OVERALL DIAMETER | 1.030 INCHES MINIMUM AND 1.090 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A108 ASSN STD 2ND MATERIAL RESPONSE OR SAE ASSN STD 3RD MATERIAL RESPONSE OR ASTM A108 ASSN STD 3RD MATERIAL RESPONSE OR MIL-S-7952 MIL SPEC 3RD MATERIAL RESPONSE OR ASTM A576 ASSN STD 4TH MATERIAL RESPONSE OR ASTM A108 ASSN STD 5TH MATERIAL RESPONSE OR ASTM A576 ASSN STD 6TH MATERIAL RESPONSE OR ASTM A576 ASSN STD 7TH MATERIAL RESPONSE OR SAE ASSN STD 8TH MATERIAL RESPONSE OR ASTM A108 ASSN STD 8TH MATERIAL RESPONSE OR MIL-S-7952 MIL SPEC 8TH MATERIAL RESPONSE OR QQ-S-698 FED SPEC 9TH MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THICKNESS | 0.050 INCHES NOMINAL |
|
|