|
|
|
National Stock Number:
5310-01-025-0812
Federal Supply Class:
5310
National Item Identification Number:
010250812
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 123HM10177-511 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 123HM10177-511 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.120 INCHES NOMINAL | | DRIVE POINT QUANTITY | 2 | | DRIVE POINT WIDTH | 0.120 INCHES NOMINAL | | COUNTERSINK ANGLE | 120.0 DEGREES NOMINAL NUT | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE NOMINAL THREAD DIAMETER | 0.138 INCHES | | HOLE THREAD QUANTITY PER INCH | 32 | | HOLE TYPE AND QUANTITY | 1 TAPPED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/12 TEMPER T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | NOMINAL THREAD SIZE | 1.313 INCHES | | NUT DIAMETER | 1.797 INCHES MINIMUM AND 1.827 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.328 INCHES MINIMUM AND 0.358 INCHES MAXIMUM | | SPECIAL FEATURES | 3 HOLES 0.047 IN. DIA EQUALLY SPACED 120 DEG APART FOR LOCKWIRE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES | UNEF |
|
|