|
|
|
National Stock Number:
5310-01-018-0155
Federal Supply Class:
5310
National Item Identification Number:
010180155
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 3028T45P01 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| COUNTERSINK ANGLE | 80.0 DEGREES NOMINAL NUT | | CROSS-SECTIONAL SHAPE | ROUND W/WRENCH FLATS FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | FLANGE DIAMETER | 0.450 INCHES MINIMUM AND 0.460 INCHES MAXIMUM | | FLANGE THICKNESS | 0.090 INCHES MINIMUM AND 0.094 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY OVERALL | | NOMINAL THREAD SIZE | 0.190 INCHES | | NUT DIAMETER | 0.2631 INCHES MINIMUM AND 0.2635 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.149 INCHES MINIMUM AND 0.153 INCHES MAXIMUM | | PRECIOUS MATERIAL | SILVER | | PRECIOUS MATERIAL AND LOCATION | THREADS SILVER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS2410 ASSN STD SINGLE TREATMENT RESPONSE THREADS | | SURFACE TREATMENT | SILVER THREADS | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES | UNJF |
|
|