5310-01-015-9695 WASHER,FLAT Index 5310-01-015-9697 WASHER,SPRING TENSION

National Stock Number:
5310-01-015-9696

Federal Supply Class:
5310

National Item Identification Number:
010159696

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
S8154-184C01670210HONEYWELL INTERNATIONAL INC.


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.160 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
OVERALL DIAMETER0.295 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059,COND 1/4 HARD MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059,COND 1/2 HARD MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059,COND HARD MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059,COND 1/4 HARD,FINISH 2B MIL SPEC 2ND MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OVERALL
PERIPHERAL SHAPE STYLEROUND
SPECIFICATION/STANDARD DATA70210-S8154 MANUFACTURERS STANDARD
SURFACE FINISH63.0 MICROINCHES BOTTOM
SURFACE FINISH63.0 MICROINCHES TOP
THICKNESS0.014 INCHES MINIMUM AND 0.018 INCHES MAXIMUM


Click here to Register for Free 30-day Trial