|
|
|
National Stock Number:
5310-01-014-4286
Federal Supply Class:
5310
National Item Identification Number:
010144286
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 3500355-1 | 59364 | HONEYWELL INTERNATIONAL INC. | | 3500355-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| HARDNESS RATING | 50.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.475 INCHES MINIMUM AND 0.490 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.830 INCHES MINIMUM AND 0.870 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.128 INCHES MINIMUM AND 0.132 INCHES MAXIMUM | | MATERIAL | STEEL COMP E4340 OVERALL | | RECESS DIAMETER | 0.540 INCHES MINIMUM AND 0.580 INCHES MAXIMUM | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | SPECIAL FEATURES | CHAMFER ONE SIDE 25 DEG MIN 35 DEG MAX BY 0.075 IN. LG | | STYLE DESIGNATOR | RECESSED | | SURFACE FINISH | 63.0 MICROINCHES BOTTOM | | SURFACE FINISH | 63.0 MICROINCHES TOP |
|
|