|
|
|
National Stock Number:
5310-01-013-9432
Federal Supply Class:
5310
National Item Identification Number:
010139432
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 2500921-6 | 07187 | HONEYWELL INTERNATIONAL INC. | | FF-N-836 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.046 INCHES NOMINAL | | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 3 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303F OR STEEL COMP 303S OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 385 OR STEEL COMP 302B OR STEEL COMP 384 OR STEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 416 OR STEEL COMP 416SE OR STEEL COMP 420 OR STEEL COMP 430 OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 446 OR STEEL COMP 430F OVERALL | | NOMINAL THREAD SIZE | 0.250 INCHES | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE | | NUT HEIGHT | 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM | | NUT STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.423 INCHES MINIMUM AND 0.437 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD PITCH DIAMETERS | +0.2467 TO 0.2473 INCHES | | THREAD SERIES | UNS | | THREAD QUANTITY PER INCH | 48 |
|
|