|
|
|
National Stock Number:
5310-01-011-3585
Federal Supply Class:
5310
National Item Identification Number:
010113585
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 3309043-1 | 98897 | LOCKHEED MARTIN CORP | | 5310PL0815739 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 1.218 INCHES NOMINAL | | OVERALL DIAMETER | 2.875 INCHES NOMINAL | | MATERIAL | COPPER ALLOY 170 OVERALL | | SPECIAL FEATURES | 6SLOTS 0.090 IN. W,0.015 IN. MIN,0.020 IN. MAX DEEP LOCATED ON EACH SIDE | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE FINISH | 63.0 MICROINCHES BOTTOM | | SURFACE FINISH | 63.0 MICROINCHES TOP | | THICKNESS | 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
|
|