|
|
|
National Stock Number:
5310-01-010-3702
Federal Supply Class:
5310
National Item Identification Number:
010103702
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 3191966-1 | 59364 | HONEYWELL INTERNATIONAL INC. | | 3191966-1 | 77068 | ALLIED-SIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO ELECTRODYNAMICS DIV | | 4D0003-5C | 88277 | THE BOEING COMPANY | | ACL22-5 | 10630 | ANILLO INDUSTRIES INC | | MM88111-5 | 58009 | MOELLER MANUFACTURING & SUPPLY, LLC | | RA82001-5 | 17446 | HUCK INTERNATIONAL, INC | | WCL22-5 | 56878 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.314 INCHES MINIMUM AND 0.318 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.583 INCHES MINIMUM AND 0.603 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5085 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM | | MATERIAL | STEEL COMP 4130 OR STEEL COMP 1050 OVERALL | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | RECESS DIAMETER | 0.402 INCHES MINIMUM AND 0.412 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL |
|
|