|
|
|
National Stock Number:
5310-01-010-2410
Federal Supply Class:
5310
National Item Identification Number:
010102410
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 75846X057 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 75846X057 | 18915 | PEP WEST, INC. DBA PENTAIR TECHNICAL PRODUCTS USE CAGE CODE 61081 FOR CATALOGING DIV PENTAIR TECHNICAL PRODUCTS | | 75846X057 | 62372 | PRECISE OF CALIFORNIA DIV OF ADJUSTABLE BUSHING CORP | | 970331-6 | 82577 | RAYTHEON COMPANY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.196 INCHES NOMINAL | | OVERALL DIAMETER | 0.312 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8 T6 FED SPEC SINGLE MATERIAL RESPONSE OR WW-T-700/6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CHROMATE OVERALL | | THICKNESS | 0.055 INCHES MINIMUM AND 0.059 INCHES MAXIMUM |
|
|