|
|
|
National Stock Number:
5310-01-006-9021
Federal Supply Class:
5310
National Item Identification Number:
010069021
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 42217C93 | 82402 | TRIUMPH GEAR SYSTEMS INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM | | OVERALL DIAMETER | 0.690 INCHES MINIMUM AND 0.700 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMPC0 18 FSCM 03306 MFR REF 1ST MATERIAL RESPONSE OR AMS4635 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY OR COPPER ALLOY 623 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE FINISH | 63.0 MICROINCHES ALL SURFACES | | THICKNESS | 0.028 INCHES MINIMUM AND 0.032 INCHES MAXIMUM |
|
|