|
|
|
National Stock Number:
5310-01-006-3918
Federal Supply Class:
5310
National Item Identification Number:
010063918
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 002786-1 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | 5310PL1240769 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | AM5608 | 53266 | AIRPAK PRODUCTS CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | HEXAGON | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE WIDTH ACROSS FLATS | 1.007 INCHES MINIMUM AND 1.020 INCHES MAXIMUM | | OVERALL DIAMETER | 1.990 INCHES MINIMUM AND 2.000 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
|
|